About SSAC
An ISO 9001 Registered Company
May 31, 2010 SSAC was sold to the shareholders of SymCom Inc. of Rapid City, South Dakota. All the employees were offered positions with the newly formed SSAC LLC. company. Most elected to stay and help SSAC grow within the new privately held structure. Prior History: April 2001, a friendly takeover bid for the Entrelec Group was launched by ABB Inc. This takeover bid was accepted and finalized in June 2001, thereby integrating Entrelec and thus SSAC Inc. into the ABB Group.
An ISO 9001 Company
For more than 30 years, SSAC has achieved new levels of product,
quality, and service. Our customers demand quality and they get it.
SSAC was the first North American Timers and Controls Company
to have an ISO 9001 Registered quality system in place. Our ISO 9001
Quality Control Program monitors all aspects of the production process:
from incoming material to shipment. At SSAC we design quality
products and then document our process. Our goal is to
make every customer completely satisfied with the best products and
services through continuous improvement and employee involvement.
Research and Development
The research and development group provides the vehicle for bringing
forth new innovative products that meet today's and tomorrow's equipment
requirements. It is not enough to provide accurate and stable controls.
These controls must address the requirements of the application; this
is the only way the target price can be achieved. We offer a wide
selection of standard products; and if required, we will develop a
product to meet your specific needs. If your need is for one piece
or 100,000 pieces, we have the facilities, the equipment, and the
people to produce your control when you need it.
Timers and Controls Catalog - SS3
The Largest Selection of Timers and Controls Available
This product selection and application manual provides clear, concise
product data and application tips unavailable elsewhere. Double indexing and
selection charts for each section speeds product selection. This manual is
a must for all control system design engineers.
Order printed literature
SS3 [1TRC001009C0202]
Express
Products Catalog - Timers and Controls
10 Million Timers and Controls Available in 2 Days or Less
SSAC most popular standard products. This 40 page catalog presents
's most popular In Stock & Quickship Timers & Controls; All available
in 2 business days or less including: Time Delay Relays, Encapsulated Timing
Modules, Universal Timers, Alternating Relays, Voltage Monitors, Current Sensors
and Monitors, Motor Winding Monitors, Liquid Level Controls, Flashers, Tower
& Obstruction Lighting Controls, and Accessories. Most of these controls
are available for surface and 35 mm DIN rail mounting. The connection options:
screw terminals, octal sockets or 0.25 male quick connects, provide solutions
for all types of OEM equipment and custom panels.
A complete Index and a “fast find” Product Selection Guide streamlines
product selection. Each page contains the specifications needed to select
one of the part numbers shown on that page. Complete specifications are available
in the full line catalog pages on ssac.com. This catalog is easily understood
by both engineers and non-technical users.
Order printed literature
EPC [1TRC001022C0201]
Distribution
Network
SSAC has a network of stocking distributors throughout the world. A complete
list is available by clicking the button on the home page.
Application Engineering
SSAC's application engineers offer free assistance in solving all
types of control problems. This group has the knowledge and ability to refer
to numerous past and present designs, an extensive library of other manufacturer's
controls and sensors, along with a working knowledge of many types of equipment
and controls.
Technical Support
Product Design Experience
SSAC is proud of its wide selection
of standard products. These controls satisfy most applications. If
you cannot find the exact control for your equipment in this catalog,
call our application engineers. We may have already developed a similar
custom control. SSAC has over 3,000 custom project numbers on
file. The design you require may be a slight modification of an existing
design, or a complex development program using a microcomputer.
Complex or simple, SSAC provides the required service. The process starts when you contact our application engineering group. After we receive a description of how your equipment must operate, we will process an estimate for design and production. We can design the control with conventional through hole components or with surface mount technology. For most designs, there is no charge for engineering. Free engineering is part of the service we provide.
Quality Control Program
SSAC's Quality Policy: SSAC's goal is to make every
customer completely satisfied with the best products and services
through continuous improvement and employee involvement.
We understand the important role played by our Quality Control
Program in making our products dependable, competitive, and responsive
to our customer's needs. In order to fully realize our stated Quality
Policy, we monitor the Quality of the incoming material, the quality
of each step of the manufacturing process, and we continue to monitor
the performance of units after sale and installation.
Documentation
SSAC has a documented and implemented quality management system consistent with international standards for the design and manufacture of electronic controls. The quality system is documented in a quality manual, operating procedures, work instructions, process procedures, company technical standards, along with production and quality plans. This quality system is audited and reviewed to maintain the goals of continuous improvement and customer satisfaction.
Process and Product
Quality Control (QC) is responsible for ensuring that standards are met throughout the manufacturing cycle. SSAC uses its Vendor Quality Program to monitor supplier quality and uses corrective action requests to improve supplier performance. QC plays an active role in product quality through in-process monitoring techniques including checks of documentation, electrical and mechanical parameters, and Statistical Process Control (SPC) methodology. At the end of the manufacturing process, QC conducts its final inspection of the product.
Quality from Start to Finish
We have invested heavily in our Quality Control Program. We did it to ensure that our customers will receive the best products available in every shipment. Our concern for quality extends back to our sources of material and reaches forward to our customers success with our product. We constantly reassess ourselves by critically examining the results of every product we manufacture.
© Copyright 2002-2010 SSAC LLC. All rights reserved.
Revised 06/21/10